What Is A Brad Nailer Used For?

Carpentry is a profession in which the limbs are subjected to various injuries. The nail can be damaged, or the fingernails can break due to an impact.

Are you fed up with injuring your fingers every time you try to tap? So, with that out of the way, it’s time to dump her and move on.

Read this article to the end to avoid this and minimize your risk of injury to zero, and hit the nail instead of nailing yourself.

To proceed, you will need to know more about Brad Nailer, so we have decided to provide you with a definition of it.

Definition of brad nailer

The Brad Nailer is a specialized hammering tool specifically developed for highly precise woodworking and is one of the instruments used in carpentry.

Highly qualified nails, such as the Brad Nailer, are a tool that can be used in place of traditional hammers and are strongly advisable for security and speeding up the work procedure.

One of the essential uses for this device is for small nails that are hard to fit in the hand and may injure the hands and fingers when struck by a hammer. This device is powered by electricity and protects the hands and fingers.

The Brad Nailer is used to nail wooden ornaments more cleanly and elegantly, removing the need to conceal large nails protruding from the wood with carpentry putty.

If you want to make delicate or decorative products for your home, this tool will help you achieve clean and elegant outcomes.

We decided to explore the device in this article attention to the significance of this issue and the common queries we receive.

What is the purpose of a brad nailer?

The Brad Nailer, as noted in the earlier segment, is an electric gun that uses compressed air to insert small nails known as Brads into simple and precise carpentry and woodworking.

Keep in mind that there are many choices for this, but each tool has a specialized purpose that sets it apart from others and gives it a following among users.

We have prepared a detailed summary of Brad Nailer based on our research, which we will provide below.

So the concern now is what is Brad Nailer used for?

The response is that Brad Nailers are thin nails used in building cabinets, connecting parts, molds, installing baseboards, and any other project requiring panel connections.

Remember that the Brad Nailer clipper is often confused with the finish nail, but there are significantly different appearances where the nails are more minor. They are the clinchers.

This device’s nails can be used in a hammer with cracks in the wood and work well. On the other hand, this device is handy for loosening and pulling thin nails.

They are commonly used in the following fields:

• Accessories
• Coverage
• Decorative molds
• Cabinets
• Building a house
• Cornice installation
• Other devices that require a lightweight connection

Note: It is important to note that while they are ideal for small projects and thin molds, they are not suitable for heavy molds, wood, or large boards.

Using 18 Gauge Brad Nailer

Maybe you enjoy, like some people fixing items around your house and regularly preserving your home and furniture.

A gauge of 18 Brad Nailers, for example, are used for thin nails and very seldom lead to cracks in the board, in contrast to ordinary nails, which can leave wooden boards if struck.

This Brad Nailer model is an electric nail gun with 18 gauge nails in a tiny size suitable for decorative devices.

The following are the main components of an 18–gauge Brad Nailer:

• Air inlet
• Belt hook
• Nail slide release
• Magazine
• No-mar tip
• Latch to gain access to clear jammed fasteners
• Depth adjuster
• Trigger
• Handle
• Adjustable exhaust

Brad Nailer Applications

USES OF BRAD NAILER	DESCRIPTION
Baseboard installation	One of the most common applications of a Brad Nailer today is gluing the base to the wall, which requires small and thin nails, and for this reason, this device is an excellent choice. One of the primary reasons for using Brad Nailer, as previously stated, is their ease of insertion into the wood. They’re also great for gluing smaller wooden pieces to larger wooden pieces. Curiously, using brad and nails eliminates the procedure of hiding nail holes in wooden parts, which is fantastic.
Handling lightweight trim	As you can see, the nails on this device are narrow and thin, making them ideal for attaching light decorations. There is no need to use putty on the nail holes because the nails are headless and will not be observable on the wood after finishing. Because the chips in Broad nails are thinner than in other specimens, the chances of harming thin trim pieces in precision woodworking projects are meager.
The crown molding	Crown molding creates a decorative border between the ceiling and the wall. This crown resembles a cornice, but it is used on roofs. These crowns are made with thin, inconspicuous nails. Because of their light and delicate nails, chips are an excellent choice for this.
Home improvement projects	Small projects for repairing home appliances and handicrafts are regarded and are completed mainly by the people themselves. Indeed, all wooden tools requiring thin nails are always the best option. It is simple to use, even for beginners, and saves time and energy compared to other options.

Now that you understand everything about Brad Nailer, let’s compare it with the finished nailer.

Brad Nailer vs. Finish Nailer

There are two types of carpentry nails: Brad Nailer and finish nails. The big difference between the two is that Brad’s nails have 18 gauge nails, whereas Finish nails have 16 or 15 gauge nails.

Brad Gage 18 small nail makes it possible to connect delicate trims without splitting them. Nail polishes, on the other hand, have more excellent adhesion.

Trims and thin molds can be attached with a Brad Nailer without putty. On the other hand, finishing nails are what you use for most carpentry and joinery work, and you may need to putty holes.

The following table explains the difference between an 18 gauge brad nailer and a 16 gauge finish nail gun.

	BRADE NAILER	FINISH NAILER
NAIL TYPE	Brads are thin 18-gauge nails	16-gauge and 15-gauge nails
HOLE SIZE	Approximately 0.0475 inches	Up to 0.0720inches
CAPACITY	Less holding power	Ability to withstand a higher payload.
RECOMMENDED NAILER	DEWALT Brad Nailer	MAKITA Finish Nailer
USES	Perfect for affixing thin trims without splitting. This material is ideal for lightweight boards and moldings.	Remarkable for furniture finishing, door casing, and other carpentry work. Use on plywood, MDF, baseboards, and other similar surfaces.

Conclusion

This article attempted to explain everything you need to know about this nail gun.

We hope you find the items helpful, and please leave a comment if you have any problems using a Brad Nailer.