You are most likely a carpenter or someone interested in woodworking art.
If our guess is correct, this article will discuss some crucial issues that you encounter daily and how you can fix them.
Imagine that you are building a table, and well, it’s common sense that a table should have a flat surface, but what if you used a plank of wood with a big lump in front of it?
In this situation, you cannot use power tools and not even a jigsaw, and if you intend to use sandpaper, it will take forever.
So what is the solution here?
We bring you gifts, the gift of figuring this issue out and finding a solution that will relieve you for the rest of your career.
The Flush-cut Saw.
If you are confused about what this saw even is, keep reading this article to find out.
You will read:
- What is a flush-cut saw?
- How and where to use the flush-cut saw?
- What are different kinds of flush-cut saws?
- eventually
Shall we start?
What is a flush-cut saw?
Every artist’s career comes at a time when difficulty on the road will keep them from going forward.
Although, in the case of a carpenter, this bump is a lump.
When you look at it, we have some woods that feel like getting a warm hug; we mean that the wood is beautiful and you love it, but several of these woods have plugs; they are lumps on the wood that make the working of them difficult.
Now let’s learn with an example.
Imagine that you are trying to build a dining table for your home, and the wood you are using has these lumps in wood.
Physically, you cannot use a power saw to cut this part off, but there is a simple way to deal with this obstacle.
There is a saw in the handsaw family, and it’s called Flush-cut saw. Usually, these saws have flexible blades or angled ones responsible for cutting flat surfaces.
In the example that we said, you can bend Flush-cut Saw and cut the pieces of wood that you wish were gone.
These saws come in different sizes and shapes, and you have to buy the one that will suit your work the best.
Presuming that you have a general idea of “what is a flush-cut saw,” let’s find out how we can use this tool for our benefit.
Flush Cut Saws feature either bendable or slanted blades, which allows them to be employed flush to a workpiece while the saw is in operation. Dowels, pins, and plugs are all examples of protrusions that may be removed with this technique, resulting in creating a flat surface. Saws that make flush cuts are often pulling saws, which means that they make cuts using the pull stroke instead of the push stroke.
How and where to use the flush-cut saw?
As we said, flush-cut saws are a way to cut the extra parts of flat wood.
Now in this part, we will tell you how you can cut a piece of wood without damaging it; in this example, we are going to use a nightstand table:
Step 1
After identifying the part that you wish to remove, use colorless petrol or water to soften the wood; this is because:
- Softwood will not break that easily.
- It makes your job way easier; cutting dry wood is way harder, and you can make mistakes beyond repair doing it.
After cutting the part, throw it away and move on to the next step.
Step 2
Use 600 or 700 sandpaper and start smoothing out the surface you just cut; make sure to even the section with all of the table, so it doesn’t look wavy.
Step 3
After completely smoothing out the surface, use some wood wax or wood spray coloring tools to cover the section, and basically, all of the tables in wax or paint.
After sanding an area, it will look different from the rest of your wood, so the wax will deal with that problem.
Step 4
After the paint or wax has dried out, go over the whole table and apply another coating of wax or your desired color, and DONE.
After these steps, you have a flat surface to use.
Tips on using this technique and tool:
Combine these tips with the instructions we just gave to get the best possible end:
- When using smaller surfaces like a photo frame or a plate, you can use a jigsaw, but this saw can save time and trouble.
- The bigger your surface, the bigger saw should be to perform the way you want. Small flush-cut saws can cut very well into big lumps of wood.
- As we said, there are two types of flush-cut saws, and you have to pay attention to what you are trying to do to purchase the right tool for the job.
Moving into the next chapter, we will discuss the two types of Flush-cut saws and what they are suitable for; this part is critical to keep reading.
What are different kinds of flush-cut saws?
We mentioned a couple of times there are two types of Flush-cut saws in the market; although they have the same use in general, they are different in fine detail.
Let’s see what they are:
- Flexible saws
- Angled saws
Flexible vs. Angled
(This comparison is the utility wise)
| Flexible saws | Angled saws |
| It can bend on any surface. | It can’t bend but is suitable for regular work on the same furniture. |
| It takes much more hand power. | It takes much less hand power. |
| It comes in different sizes and shapes. | Manufactured in different sizes and shapes |
Now let’s see what the chart above says about these two types of saws.
The chart shows that while two saws remove lumps from surfaces, the utilization is different.
If you have a workshop and are exclusively making tables and nothing else, the angled saw may be a better option.
But if you make all sorts of wood products and deal with new surfaces every day, the flexible saw is a better option for your work.
Now you fully understand what a flush-cut saw is and how and where you should use this tool. Therefore, let’s end this article and jump to the conclusion.
Eventually
Today we tended to a big issue that is trending in the carpentry world, and it’s about the flat surfaces on the wood.
We offered the solution of flush-cut saws, then we explained, “what is a flush-cut saw?” and how can you use it based on your style of work and your workshop situation.
There mentioned some instructions on how you can exactly use this saw and get seamless results.
We hope you enjoyed this article and the information helped you get to the flat surface you wanted in your work.
If you have other questions or experience regarding “what is a flush-cut saw?” contact us in the comment section below.
