Tools

Why Does My Circular Saw Keep Kicking Back?

One of the most often used instruments in the woodworking sector is the circular saw.

Like any other tool, the circular saw occasionally has a problem that most carpenters complain about, and the issue is, why does my circular saw keep going back?

Saw keep going back is, in reality, a problem that most carpenters experience at some point.

The end of the wood may increase the strain on the blades when the sawing process begins, forcing the blades to travel forward.

Meanwhile, the blades are storing a lot of force, and if they can’t withstand it, they will come out in the opposite direction of the cut and travel towards you, which can be hazardous.

It should be highlighted that resolving this issue is both challenging and crucial, and if not done so correctly, it can result in deadly incidents.

Well, now you know that in the process of carpentry and using a circular saw, carpenters can face problems such as why my circular saw goes back.

Suppose you are one of the carpenters who encountered this problem or are interested in knowing the reason. In that case, we will continue to investigate the causes and offer solutions. But it is better to have acknowledged what this tool is?

Why-Does-My-Circular-Saw-Keep-Kicking-Back

What is the circular saw?

The circular saw, an electric instrument that cuts substances with a round blade is one of the carpentry tools. There are two modes of operation for this tool:

  • Desktop 
  • Manual.

A round blade with sharp metal teeth is used in circular saws. The blade, in reality, spins to smooth the wood. Artisans can use a variety of blades to cut a variety of boards, including wood, panels, and concrete boards.

Cutting sheet metal also necessitates the use of specialized blades. The height and depth of the cut can be adjusted on most circular saws, and certain saws are built to make oblique cuts.

Advantages and disadvantages of circular saw?

Advantages Disadvantages
The ability to move about. Low precision.
Being able to work without wires.
It’s possible to cut from any area. Make a large amount of sawdust.
to be cost-effective

What causes a circular saw to keep kicking back?

A variety of circumstances can cause a carpentry tool’s malfunction. All that can be done is to figure out what caused the damages and make efforts to avoid them in the future.

So, let’s have a look at these factors together:

Unsharpened Blades

The Usage of a saw with slowdown blades is one of the significant causes that might cause a circular saw to keep kicking back.

In reality, cutting wood with non-sharpened blades necessitates additional pressure, which increases wear on the wood and causes a higher risk of the blade being trapped in the board.

As a result, applying more significant pressure to the saw can force it to reverse direction.

Excessive Usage of saw

Excessive Usage of the saw, which can lead to overheating of the saw blades, is another aspect that can create difficulties with circular saws. The Usage of saw blades generates a lot of heat. Friction and burn marks appear on the wooden board due to this. As a result, too much heat might cause a circular saw to keep kicking back.

Usage of Knotted Wood

As you may be aware, several types of wood are utilized in various branches of carpentry. Several of these woods are tough to work with when it comes to sawing.

The knots in these woods are denser and more profound than in other woods. Cutting these woods requires a significant amount of effort, which may cause the blades to become locked and cause a circular saw to keep kicking back.

To avoid potential risks, care should be given while selecting wood to ensure that it is neither crushed nor twisted.

Choosing the Cutting Blade Depth

When altering the depth of the saw blade, be sure the selected depth does not exceed the cutting blade’s real deep. The chosen depth could be more than the wood’s actual thickness, increasing the danger of exposure and causing a circular saw to keep kicking back.

Workpiece Dimensions

The precision of the workpiece is one of the most critical factors to consider when using a circular saw. You’re simply misleading yourself if you opt to go cheap and risk having limited bandwidth.

This might result in the piece of wood being hurled forcefully, with the speed of the strike being so high that it causes a circular saw to keep kicking back.

Why-Does-My-Circular-Saw-Keep-Kicking-Back

How Can Circular Saw Kickbacks Be Avoided?

Here are some strategies to control circular saws that you will like if you join us.

How to Use the Saw

The circular saw has two front and back handles in general. Working with a saw is relatively straightforward; all you have to do is be sure to grip both handles of the saw when using it so that you can remove it in the event of an incident.

Managing Your Position

One of the most important things to remember while utilizing a circular saw is to keep your position. It would be best if you did not stand directly behind a circular saw to avoid potential risks.

Check Your Circular Saw

Checking a circular saw is one of the most critical things before using it.

Before using your saw, be sure you thoroughly install it and check the following items:

  • If the saw bends or flattens, check the blades and don’t use it.
  • Examine the blades for any deformation or warping, and do not use them if they are.
  • Do not permit any of the causes to lead the saw blades to overheat. If you need to use the saw quickly or slowly, be sure the blades are razor-sharp, and the engine is powerful enough.
  • Adjust the blade depth capacity as needed. It’s OK to go half an inch over the wood’s thickness.
  • Make that the blade is securely fastened to the shaft and isn’t slipping.

Safety Precautions

Wearing all necessary and critical safety equipment is the finest and most effective strategy to prevent or lessen any dangers.

This is a crucial step in avoiding tragic collisions. Wear goggles, gloves, a safety shield, and special boots when operating a circular saw.

Correct Cutting technique

When using a circular saw, make sure the blades aren’t laying on the board and don’t start cutting the board right away; instead, wait for the saw to achieve maximum speed before carefully cutting and moving the board. On the board, make a continuous incision.

So now you learn what a circular saw is and why it might be harmful to use. Here are five things you can take to help protect yourself from possible risks.

In the following section, we’ll compare the two most prevalent types of saws so you can learn more about them and make an informed decision.

Why-Does-My-Circular-Saw-Keep-Kicking-Back

What is a table saw?

Let’s begin by answering the question, “What is a table saw?”

A table saw is a saw with a circular blade that protrudes from a hole in the table or work surface. Only straight and exact lines are cut with this saw.

Modern table saws provide you with greater freedom in terms of the kind of cuts you may make by allowing you to modify the height and angle of the amount.

Which is better: a table saw, or a circular saw?

There is no choice between these, according to the evidence gathered. If you only have the money to buy one tool, it relies on what you want to do with it.

A circular saw is the most acceptable option if you need a saw to make the most of the cutting range for various activities. It’s also the ideal option if you have to bring your tools to work with you.

On the other hand, this sort of saw may be a better alternative if you value additional precision and need a piece of wood that can be put on a saw table in your workshop.Why-Does-My-Circular-Saw-Keep-Kicking-Back

In short,

As you can see, carpentry employs a variety of tools, each of which has benefits and drawbacks when misused.

Throughout this post, we discussed the circular saw and the risks and possible remedies to prevent a circular saw from keeping kicking back.

We hope you find this article helpful and that you can operate a circular saw with ease after reading it.

Leave a Reply

Your email address will not be published.

Related Articles

Back to top button